[NeXus-code-tickets] [NeXusCode] #168: nexus-42.rc4 including f90 modules with SUN's compiler

[NeXus Data Format Library and Applications]

#168: nexus-42.rc4 including f90 modules with SUN's compiler
--------------------------+-------------------------------
  Reporter:  Pete Jemian  |      Owner:  Unassigned
      Type:  defect       |     Status:  closed
  Priority:  major        |  Milestone:  NeXus 4.2 Release
 Component:  napi         |    Version:  trunk
Resolution:  wontfix      |   Keywords:
--------------------------+-------------------------------
Changes (by Mark Koennecke):

 * status:  new => closed
 * resolution:   => wontfix


Old description:

> Sun's compiler (SUNWspro/bin/f90, same as f95) uses the {{{-M}}} compiler
> switch rather than {{{-I}}} to indicate module directory paths.  Note the
> manual correction in the excerpt below.
>
> {{{
> f90 -I../bindings/f90
> -I/home/oxygen/JEMIAN/dev/src/nexus-4.2rc4/bindings/f90 -c NXdump.f90
>
>    use NXmodule
>        ^
> "NXdump.f90", Line = 35, Column = 8: ERROR: "NXMODULE" is specified as
> the module name on a USE statement, but the compiler cannot find it.
>
>    type(NXhandle) :: file_id
>         ^
> "NXdump.f90", Line = 37, Column = 9: ERROR: Derived type "NXHANDLE" is
> used, but it does not have any components defined for it.
>
>       integer :: status, type, rank, dimensions(NX_MAXRANK)
>                                                 ^
> "NXdump.f90", Line = 52, Column = 49: ERROR: Local variable "NX_MAXRANK"
> must be a dummy argument or in common to be used in a bounds
> specification expression.
>
> f90comp: 82 SOURCE LINES
> f90comp: 3 ERRORS, 0 WARNINGS, 0 OTHER MESSAGES, 0 ANSI
> make[1]: *** [NXdump.o] Error 1
> make[1]: Leaving directory
> `/home/oxygen18/JEMIAN/dev/src/nexus-4.2rc4/applications'
> make: *** [all-recursive] Error 1
> [jemian at elmo,774,applications]$ f90 -M../bindings/f90
> -M/home/oxygen/JEMIAN/dev/src/nexus-4.2rc4/bindings/f90 -c NXdump.f90
> [jemian at elmo,775,applications]$
> }}}

New description:

 Sun's compiler (SUNWspro/bin/f90, same as f95) uses the {{{-M}}} compiler
 switch rather than {{{-I}}} to indicate module directory paths.  Note the
 manual correction in the excerpt below.

 {{{
 f90 -I../bindings/f90
 -I/home/oxygen/JEMIAN/dev/src/nexus-4.2rc4/bindings/f90 -c NXdump.f90

    use NXmodule
        ^
 "NXdump.f90", Line = 35, Column = 8: ERROR: "NXMODULE" is specified as the
 module name on a USE statement, but the compiler cannot find it.

    type(NXhandle) :: file_id
         ^
 "NXdump.f90", Line = 37, Column = 9: ERROR: Derived type "NXHANDLE" is
 used, but it does not have any components defined for it.

       integer :: status, type, rank, dimensions(NX_MAXRANK)
                                                 ^
 "NXdump.f90", Line = 52, Column = 49: ERROR: Local variable "NX_MAXRANK"
 must be a dummy argument or in common to be used in a bounds specification
 expression.

 f90comp: 82 SOURCE LINES
 f90comp: 3 ERRORS, 0 WARNINGS, 0 OTHER MESSAGES, 0 ANSI
 make[1]: *** [NXdump.o] Error 1
 make[1]: Leaving directory
 `/home/oxygen18/JEMIAN/dev/src/nexus-4.2rc4/applications'
 make: *** [all-recursive] Error 1
 [jemian at elmo,774,applications]$ f90 -M../bindings/f90
 -M/home/oxygen/JEMIAN/dev/src/nexus-4.2rc4/bindings/f90 -c NXdump.f90
 [jemian at elmo,775,applications]$
 }}}

--

-- 
Ticket URL: <http://trac.nexusformat.org/code/ticket/168#comment:3>
NeXus Data Format Library and Applications <http://www.nexusformat.org/>
NeXus Data Format Library and Applications